Without a beautiful and strong flooring, it is absolutely impossible to create a good and attractive interior of the dwelling. Today there are many materials that can give the cholers a beautiful appearance. But to achieve the perfect sex, without investing cash masses, you can, by means of a cycle by removing an existing coating, and then, using a varnish coating, bring a wooden base into an amazing view. Indeed, for the most part, the floors of houses have precisely a wooden base. Today, the cycle will cost the customer inexpensively, but you can do it yourself. This will require the following equipment: scissors, vacuum cleaner, varnish, roller and brushes, sandpaper, cycles, manual cycle or angular grinding machine.
We get to work
Before carrying out a cyclist, it is necessary to prepare the surface of the floor. As already mentioned, if there is an old coating, then it must be disrupted. Next, you need to shift or sprinkle an already open wooden surface from large particles of dirt and dust. Then it is necessary to close all the cracks, this can be done with special fast -adapting putty or thin stacks, depending on the nature of the cracks. Now you can proceed directly to the cycle.
Stages of cycle
The first thing to do is to bring all the necessary tools into the room where the work is done. Then you need to seal the gaps of the doorway so that the dust does not fly into the rest of the rooms. We begin to cycle. To do this, insert large -grained sandpaper into the machine. We start work from the corner of the room, slightly tilting the cycling machine back. After putting it into action, we smoothly put the working surface on the floor. We move the room diagonally, while we make a little overlap the strip. Having carried out several completed movements with a cycle machine, stop and check the integrity of the sandpaper, if necessary, replace it. Having finished working diagonally, clean the vacuum cleaner and proceed to repeat the procedure only now across the previous processed strips (paths). Then put the mid -grain sandpaper and go through the floor surface only now along the boards. Repeat the same thing with fine -grained sandpaper. Now go to the corners of the room using a manual cycl or an angle grinding machine. The final stage will be cleaning the floor of dust and applying varnish with a roller, and in the corners a brush. Everything can be done yourself, but if you want the work to be done with high quality and at the highest level, it is better to contact professionals. The choice is always yours!