The outer cladding of pre -lined walls begins and the weighs of the outer corners and the plane of the walls, slopes of the openings and the installation of lighthouses to the entire height of the building from the base to the cornice. Based on the results of the wealth on the walls, wooden lighthouse rails are strengthened over the entire height of the building at a distance of 15-20 m from each other so that it can be a rule of 1.5-2 m long to check the quality of the work performed, the beacons are removed as the cladding is arranged.
Artificial slabs during facing are most often attached to pre -installed metal details (crutches, anchor bolts, reinforcement, etc. p.) on the solution.
The first row of plates is necessarily set along the cord, the installation is checked by a plumb line and level. The space between the slabs and the wall is filled with a solution. Installation of plates is carried out dry using elastic gaskets.
With outdoor cladding of stone with a mirror or community, the details of the details are mating dry with thoroughly grinding edges.
Work on the internal cladding of the walls begin by checking its surface throughout the height and setting the lighthouse. The beacons are installed so that the thickness of the solution layer under the tiles is not more than 15 or less than 7 mm. The irregularities of the surface of the base are aligned with the solution.
For high-quality facing work, especially with a small-piece stamp, it is advisable to use templates and devices of various designs.
facing materials, from geometric shapes, mm.