After it was decided to put the windows of Serpukhov, you need to remember that it is also required to update the slopes. Performing the design and repair of apartments, use such methods of preparing slopes: plastering surfaces, using drywall and plastic materials.
The use of plastic for finishing is considered the best option for updating slopes. The main factor is obvious: the plastic surfaces are easily washed, maintaining the original appearance. To insulate windows, use mineral wool with waterproofing properties.
The decoration of window openings with plastic begins with the fact that along the entire perimeter of the slope using self -tapping screws, thin wooden rails are attached, which will become the basis for plastic sheets. Reiki are attached vertically, which contributes to the close fit of plastic blanks to them. Now you need to mark two vertical and upper horizontal lines along the outer cut of the slopes.
It is according to this marking, where the slope of the wall adjoins the profile that has a F-shaped shape. Segments are measured in height and width of the window. Attaching a profile to wood racks is more convenient using a typical construction stapler. At the next stage, at the scenery site, the launch strip of the P-shaped profile is installed. To do this, you will need small screws like “Blop”. The working groove of the starting strip is used to fix the blank of plastic.
Having completed all the preparatory work, you can start installing slopes from plastic, while warming them. So that there are no gaps, all the workpieces are thoroughly adjusted one to the other with the maximum accuracy. Upon completion of the work, a sealed structure with a good appearance is obtained. The smallest cracks in the joints can be embedded using white silicone.