You can put the tile yourself if you study this whole process well. There is nothing complicated in it. You need to choose tiles, prepare tool tools, as well as purchase a suitable glue suitable for this tile. Then proceed to prepare the surface of the walls or floor for laying tiles. But, it should be borne in mind that the work is dirty and additional building material is needed in order to perform it well.
Before work, you need to clean the walls well and prepare them for applying an adhesive solution. The same applies to the floor. The surface needs to be cleaned and leveled. Potter all holes. The floors are aligned with cement or use a bulk floor, which itself will fall on the surface.
If the surface is even and dry, then you can start styling. It is better to purchase the finished glue that is suitable for the prepared tiles. If this is not possible, then you can prepare a cement mortar for tiles yourself. This is a common mixture of cement and sand. Sand needs small and cleaned so that there are no large granules.
It is more difficult to lay out patterned tiles, but you can do such a job yourself. If we are talking about ordinary plain tiles, then laying starts in the middle of the room. Put squares and retreat to the edges. You can start styling from the corner. A gear spatula is smeared with a gluing solution. The back of the tiles is also smeared. Then connect the gluing surfaces. Each pair of tiles are checked by the level. To press or raise the tile if necessary, if there are bumps.
In the case of patterned drawings, they need to be laid out on a dry floor surface. Or outline on the surface of the walls. Begin to glue a plain pattern, which is closer to the edge. You can start from the middle or from the place where the main pattern will be located. Then glue additional patterns. Even very complex combinations can be glued yourself and properly arrange the entire ornament. This is not such a difficult job.
In order to cut the tiles evenly, a good tool is needed. When using conventional glass cutter, the edges of the tile will also need to be polished. Otherwise, they will stand out ugly after grouting. And besides, sharp edges can be dangerous even after the grout was used. Therefore, it is better to rent or purchase an electric drug for cutting tiles. He cuts even curly elements. After circumcision with such a tool, the edges of the tiles do not need to be polished.
Working with good material is easy and convenient. You can create and create real masterpieces. For the bath you can make a small podium with steps. Paul tiles need to be selected nonsense, with good waterproof properties. Steps can be laid out in the courtyard of the house. There is good tile for facade work. Even the walls of the house can be laid with tiles. All this can actually be done by yourself, without the help of professional masters.
It remains not to forget to cover the seams with grout and rinse the tile. Do -it -yourself work on laying tiles will enjoy both households and guests. Thanks to the availability and a wide variety of construction equipment, it is now easy to independently carry out any construction work on laying tiles.