Today, many people, when they want to put tiles in the bathroom, try to entrust this business to specialists, however, some prefer to do this on their own. So, in order to put tiles in the bathroom, you will need the correct measurements, primer, and the corresponding materials.
Even in the bathroom there should be a place where filters, communications, and other systems for the functioning of the water supply will be installed. To do this, you need to think about where to install a hatch for tiles, which, incidentally, is installed very simply. Before starting to put tiles on the wall in the bathroom, it is necessary to make all the measurements. To check the perpendicularity of the walls, you will need the level. Even the smallest deviation after laying the tile will be very noticeable. Therefore, the wall must be thoroughly leveled. To align the wall, you can use drywall or plaster. If the wall errors are almost invisible, then you can use a special leveling mixture.
If earlier in the bathroom you already had tiles, then the old tile must be removed using scrap and hammer. The surface of the walls before laying should be completely clean and smooth. When preparing the wall for styling, a primer is very important, especially if you decide to lay ceramic tiles. So that mold does not form on the tiles, and so that it holds well on the wall, the primer must be moisture -resistant.
After the wall is ready for styling, it is necessary to make markings that will correspond to the size of the tile. The option of laying tiles can be absolutely any. For example, masonry can be started from the floor, or from the middle of the wall.
