Making the window with your own hands is quite difficult, but possible. Most often resort to this with experience with wood, and in which there are already the necessary tools in stock. Of course, if the work is of high quality, then the cost of windows with your own hands will be an order of magnitude lower than to buy ready -made Euro -covers.
The windows have a complex design. Therefore, it is available with your own hands to make a window without special requirements for tightness and sound insulation. Such windows are conveniently installed in summer houses and gazebos, as well as on the verandas and balconies. The best option for the manufacture of a window frame will be a dried board, otherwise – the frame can sag or be crumpled. The dimensions of the window frame will depend on the size of the opening. It is important to responsibly approach the choice of material for the windows – it should be without defects, solid trampling or glued beams is independently used. It is not acceptable for the material to have cracks, knots, speeches or be affected by a fungus. It must be remembered: for the manufacture of high -quality windows, only high -quality wood is used.
The design of the window itself is usually very simple – in the window opening, the box is first fixed, and a frame with glasses is attached to it. Do not forget that the windows are the dynamic part of the interior, they are opened from time to time, so the fastening and work itself should be reliable. There must be special grooves for inserting glasses in the frame. The details of the frame are connected to each other with the help of spikes, before that covering the surface of the connection with carpentry glue. Before this, it is recommended to apply special protective equipment against moisture. In the process of manufacturing, you need to carefully ensure that the parts are strictly perpendicular to each other, because the windows have a strictly geometric shape (if we are not talking about any exclusive samples).
At the final stage of work, glass is inserted into the window frame, for this they use special stacks. The process of manufacturing the window ends with its coloring, at first, of course, you can cover with a special protective tool for wood, and then – already paint for external work.
When installing the window, the box is first mounted, it should not move in the opening or change its placement under the influence of various loads.
For long -term operation of the windows, the necessary condition will be compliance with the technical parameters in their manufacture, and in the future – proper care.