Warm floor is a complex engineering system that requires the use of only high -quality equipment for reliable operation of the entire gender. Let’s look at everything in order. First of all, the warm floor needs a high -quality distribution collector. It is he who distributes the coolant along all water heating contours. In addition, it has additional functions. Modern collectors are made of stainless steel and non -ferrous metals. They are pipe, cast and others, with different appearance and cost. Someone buys brass collectors, and one of the stainless steel.
By the degree of sulfilling, collectors are divided into several species. For example, people who do not save too much buy collectors with a set of drain cranes and a duct of the duct of the liter of water per minute. Collectors are also divided by the number of connections, as a rule, from 2 to 9. If desired, two collectors are twisted into one.
If necessary, you can buy additional equipment for water warm floors, for example, servo drives, with which you can adjust the room temperature in automatic mode. There are only a few types of servo drives and many indoor thermostats. Thanks to this, they can be selected under the color of the tile or wallpaper.
The module of the worship is another additional equipment for warm floors. This name may vary, but the essence remains. It is to ensure that with stable characteristics of the coolant, provide automatic temperature adjustment. The module is based on a couple known to many of us, a circulation pump and a three -way crane. The secret is that all this is collected in one building and is very compact. Through the chassis, the pump begins to pull the coolant, instantly mixing the return. Due to this, heating with the module is more slow. To accelerate heating, you need to open the entire three -way valve for the entire. You can track the temperature by the thermostat, which is very convenient.
The thermallane, thermometer and bypass were also added to the module. As you can see, all manufacturers use this dink, but they do it in their own way.
Conclusions
Decide on the number of connections. Choose a stainless steel or color material collector. Pay attention to the configuration: mounts, descents and drain valves, ducts of the duct or flow meter. Choose additional equipment: indoor thermal attires, servo drives, a module.