The glass wallpaper is made of fiberglass, so it is not only fireproof, but also environmentally friendly material. Prepare: spatula, water, primer, rag, glass wallpaper, trowel, brush, glue, roller. Before pasting, put all the walls in order. Remove all old coatings, as well as dust and dirt. There should be no cracks or cracks on the walls. Clean the walls, align, primed. Pay attention to the labeling of glass wallpaper, thanks to it you will find out which side of the wallpaper is the front and which is the wrong side.
The labeling is a colored strip located on the back of the windshield roll. Dilute the glue with water, strictly observing the instructions on its packaging. Cut a piece of glass wallpaper of the desired length, leaving a couple of centimeters for allowance. Apply the glue first on the wall, and then on the wrong side of the cut -bended piece of glass wallpaper.
Wallpaper glitter in voyage. Direct the glued piece with a rubber roller to remove air bubbles. It will also help the wallpaper better to distribute along the wall. Extra glue that performed from the edges of the wallpaper, carefully remove a slightly damp cloth. When the wallpaper dries, carefully cut the allowances.