How to plaster the ceiling correctly: what to take into account

It is not required to prepare the ceiling in advance if modern materials are used in the decoration. But putty and plaster you still need to paint the ceiling. Plastering work on the ceiling. The mixture of plaster is most suitable for gluing chips and cracks on the ceiling. Prepare a mixture using a construction mixer, plastering, water and containers where a knead will be produced. After adding all the ingredients to the container, the resulting mixture must be stirred with a mixer. As a result, the mass should turn out to be homogeneous. When applying the resulting solution, a small spatula is used. When leveling, a larger spatula is used. Due to the severity of the plaster, it can fall off if you apply a lot of solution at a time, so the layer should be thin. The next layer must be applied after two or three hours. You can start puttying already when all the irregularities on the ceiling are removed. Putty on the ceiling. The ceiling must be made smooth, for this you need putty. It is recommended to make a mixture of putty yourself and not purchase in the store. The type of putty used depends on the humidity. With high humidity type of putty – lr+, with normal – kr. Now you will need a container, water and a mixer again. Typically, the packaging is equipped with instructions for the manufacture of the mixture, where the proportions are indicated. The resulting mixture must be stirred to get a homogeneous mass. After the finished putty should be infused for three, five minutes, and then it is mixed again. We recommend putting it in the following way described below.

A small spatula, put a putty on a large spatula, the width of which is from sixty to eighty centimeters. And already put a putty with a large spatula, about two millimeters thick, to the surface of the ceiling. Putty starting from the window, and the putty layers should overlap the launch. In order to prevent cracks from putting down as a result of putty, the thickness of the final layer should not exceed five millimeters. When the work is finished, it is necessary to give putty well to dry. This is required for about twelve hours. After which the ceiling should be sanded using sandpaper. The granularity of the sandpaper should be medium. And in conclusion it is necessary to cover with a primer and then paint the ceiling.

Share
Tweet
Pin it
Share
Share
You May Also Like
View Post

This object has such a fate that involuntarily allocates it among others in Kazakhstan. The bridge across the Ural River in the administrative center of the West Kazakhstan region began to be built in the “good old days”, that is, under the Soviet regime. Since the republic never had their own organizations specialized in this case, bridge builders from different Russian cities worked here here. Then there was a notorious “parade of sovereignty”, followed by an economic crisis. Although the construction of the bridge continued, however, the payment of the executed volumes was now constantly delayed, or even at all moved away for an indefinite period. For this reason, the bridge builders stopped working several times. However, the object in Uralsk is one of the most significant in Kazakhstan, and therefore did not forget about it: the press periodically woke up this topic. Increased attention is also explained by the fact that the bridge across the Urals does not just connect the two banks of the river, it makes up an important link on the shortest path from Central Asia to the European part of Russia. As a result, the story of the invitation of bridge builders from a neighboring state was repeated again and again, without a visible result. There is a rather funny moment in it. A couple of years ago, when the President of Kazakhstan Nursultan Nazarbayev arrived in Uralsk, the local authorities invited him to take part in the solemn open… bridge over the Urals. The head of state made sensory words and cut the red ribbon. But when the ceremony ended and the president left, the entrance to the bridge was closed. The fact is that every driver who would decide to update the shortest path from Central Asia to Russia could well have been on the other side, but at the bottom of the river. The object was not over. And the main difficulty was not so much in building a car transition through the Urals itself, but in the construction of multi -kilometer approaches to it through a constantly flooded floodplain. And work here still start and finish. And now in the republic they decided to return to the long -suffering object again. The Ministry of Transport and Communications of the Republic of Kazakhstan announced the competition for state procurement of works and services for the reconstruction of the bridge over the Ural River. The required delivery time within 2000. Potential suppliers who meet the qualification requirements stipulated in Article 10 of the Law of Kazakhstan “On public procurement” are allowed to the competition.